History Statistics-Distribution-Interval - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

history statistics-distribution-interval

To set the time interval for each statistics distribution kept for a Cisco NX-OS IP Service Level
Agreements (SLAs) operation, use the history statistics-distribution-interval command. To return to
the default value, use the no form of this command.
Syntax Description
milliseconds
Command Default
The default interval used for each statistics kept is 20 milliseconds.
Command Modes TCP connect configuration mode (config-ip-sla-tcp)
UDP echo configuration mode (config-ip-sla-udp)
Command History Release
6.1(1)
Usage Guidelines
In most situations, you does not need to change the time interval for each statistics distribution or number
of distributions kept. Change these parameters only when distributions are needed, for example, when
you are performing statistical modeling of your network.
This command does not require a license.
Examples This example shows how to set the time interval for each statistics distribution kept for a Cisco NX-OS
IP Service Level Agreements (SLAs) operation:
switch(config)# ip sla 1
switch(config-ip-sla)# udp-echo 192.199.199.2 1
switch(config-ip-sla-udp)# history statistics-distribution-interval 10
switch(config-ip-sla-udp)#
Related Commands Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
OL-27555-03
history statistics-distribution-interval milliseconds
no history statistics-distribution-interval
Distribution interval value in milliseconds (ms). The range is from 1 to 100
milliseconds.
Modification
This command was introduced.
Description
groups.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
history statistics-distribution-interval
1-15