Sony CINEALTA PDW-F330K Operating Instructions Manual page 33

a ZOOM T/W (telephoto/wide-angle) buttons
Use these when a zoom lens is mounted.
Press W to zoom in the wide-angle direction, and T to
zoom in the telephoto direction.
b SHOT MARK 1/2 buttons
Press these during recording or playback to record a shot
mark 1 or shot mark 2.
These are only effective when SHOT MARK 1/2 is set to
ON on the ESSENCE MARK page of the
MAINTENANCE menu.
c SUB CLIP button
Press this to carry out a scene selection setting.
d THUMBNAIL button
Press this button to carry out a thumbnail search or create
a clip list.
When pressed, the whole-screen display changes to a
thumbnail display. Press once more to return to the whole-
screen display.
e PREV (previous) button
This jumps to the start of the current clip, then pauses.
f F REV (fast reverse) button
This plays back at high speed in the reverse direction.
g PLAY/PAUSE button
Press this button to view playback video.
Press this button again during playback to pause.
h REC (record) button
Hold down the unmarked button, and press the z button to
start recording.
i REC PAUSE (recording pause) button
Hold down the unmarked button, and press the X button to
pause recording.
1 ZOOM T/W buttons
2 SHOT MARK 1/2
buttons
1
3 SUB CLIP button
SHOTMARK
2
4 THUMBNAIL button
THUMBNAIL
5 PREV button
PREV
.
6 F REV button
FREV
m
7 PLAY/PAUSE button
z
8 REC button
9 REC PAUSE button
PUSH SET
T
ZOOM
W
0 PUSH SET button (four-way arrow key)
qa NEXT button
SUB CLIP
PLAY/PAUSE NEXT STOP
qs STOP button
u > x
FFWD
M
qd F FWD button
REC REC PAUSE PUSH AF
X
qf PUSH AF button
j PUSH SET button (four-way arrow key)
When thumbnails (index frames of each clip) are displayed
on the LCD monitor, you can use this button to select a
thumbnail.
Press the button in four directions to move the cursor up,
down, left and right. After selecting the desired thumbnail
with the cursor, press the button centrally to confirm.
k NEXT button
This jumps to the start of the next clip, then pauses.
l STOP button
Press this to stop disc playback.
m F FWD (fast forward) button
This plays back at high speed in the forward direction.
n PUSH AF (auto focus) button
Use this when an auto focus lens is mounted.
When the button is pressed, the auto focus operates until
the image is in focus, then disengages.
Using the infrared remote commander
Before use
Pull out the insulation sheet.
Replacing the lithium battery in the remote
commander
Use a CR2025 lithium battery as power source for the
remote commander. Do not use any battery other than
CR2025.
Insulation sheet
Location and Function of Parts
33