Sony CINEALTA PDW-F330K Operating Instructions Manual page 23

e Accessory fitting shoe
Attach an optional accessory such as a video light (see
page 45).
f Shoulder strap fitting
Attach the supplied shoulder strap (see page 44).
g Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position of the
viewfinder (see page 42).
h Viewfinder fitting shoe
Attach the supplied viewfinder.
i Fitting for optional microphone holder
Fit an optional CAC-12 Microphone Holder (see page 46).
j LIGHT (video light) connector (2-pin, female)
A video light with a maximum power consumption of 50
W, such as the Anton Bauer Ultralight 2 or equivalent can
be connected (see page 45).
k MIC IN (microphone input) (+48 V) connector
(XLR type, 5-pin, female)
Connect the supplied stereo microphone to this connector.
The power (+48 V) is supplied via this connector.
l Shoulder pad
Raise the shoulder pad fixing lever to adjust the position in
the front-to-rear direction. Adjust the position for
maximum convenience when operating the unit on your
shoulder.
For details of the adjustment, see "Adjusting the Shoulder
Pad Position" on page 44.
1 Video output and timecode connectors
PDW-F330
1 GENLOCK IN connector
GENLOCK
IN
Y
VIDEO
OUT
2 VIDEO OUT Y/P
PDW-F350
1 GENLOCK IN connector
GENLOCK
IN
VIDEO
OUT
3 VIDEO OUT connector
a GENLOCK IN (genlock signal input) connector
(BNC type)
Input an SD or HD reference signal when applying a
genlock to the camera, or synchronizing timecode to an
external source. Use the GENLOCK page of the
MAINTENANCE menu to carry out phase adjustment of
the horizontal synchronization signal for genlock.
Note
The subcarrier phase cannot be adjusted.
b VIDEO OUT (video output) Y/P
(BNC type)
F330
Output component video signals (Y/P
monitor.
Connect a video monitor with component video signal
input connectors to check the video being shot by the
camera. You can also monitor VDR playback video.
You can select HD Y/P /P
B R
on the OUTPUT page of the OPERATION menu. For
details, see "Selecting the Output Signals" on page 140.
P
B
P
R
/P connectors
B R
TC IN
TC
OUT
5 TC IN connector
4 TC OUT connector
/P connectors
B R
/P ) for a video
B R
or SD Y/P /P signal output
B R
Location and Function of Parts
23