System Setup - Clarion PJ-4605 Owner's Manual

System Setup

1. Long press [ ] button.
2. Then press [x] or [v] button to
select the system setup items:
AUTO STORE ∗
AUX SENS ∗ BT SELECT
BT DELETE BT DISCON
A-ANSWER A-CONNECT
TEL MEMORY PIN CODE
DIMMER BEEP
RESET
• BT SELECT: select paired device to
connnet
• BT DELETE: delete paired device
• BT DISCON: disconnect device
• A-ANSWER: auto answer
• A-CONNECT: auto connect
• TEL MEMORY: priority for
phonebook download
• DIMMER: dimmer control
• BEEP: button beep sound
• EQ-SELECT: select rear or
subwoofer
• RESET: memory reset
∗ These items are setting for the different
source mode. The detailed operations
please follow the following source mode
operations chapter.
3. Turn [ROTARY] knob to adjust the
setting.
• BT SELECT/BT DELETE/BT
DISCON/A-ANSWER/A-CONNECT:
detailed operations are below
• DIMMER: ON/OFF (default: ON)
• BEEP: TYPE-A/TYPE-B/OFF
(default: TYPE-A)
• EQ-SELECT: G-EQ, BASS/TREBLE
(default: G-EQ)
• RESET: detailed operations are
below
4. After completing settings, press [DISP]
button to return to the previous mode.
Note:
• You can press [DISP] button to return to
the previous layer duiring operations.
DX/LO ∗
EQ-SELECT
Select Paired Device
This is a setting for user to select one of
the paired mobile phones to connect.
1. Select "BT SELECT" in system setup
items.
2. Turn the [ROTARY] knob to choose one
of the paired devices.
3. Press the [ROTARY] knob to connect.
Delete Paired Device
This is a setting for user to delete one of
the paired device from the list.
1. Select "BT DELETE" in system setup
items.
2. The paired device appears in the
display, then turn [ROTARY] knob to
choose one of the paired devices.
3. Press [ROTARY] knob.
4. Turn [ROTARY] knob to select
"CANCEL" or "ARE U SURE", and
press [ROTARY] knob.
CANCEL: cancel deleting the paired
device.
ARE U SURE: confirm to delete the
paired device.
Notes:
• Deleted paired device will not automatically
rearrange in the paired device list.
• After deleting the device, the phone book
and the call history records will be deleted
too.
Disconnect Device
This option is used to disconnect the
currently connected device.
1. Select "BT DISCON" in system setup
items, and press [ROTARY] knob.
2. Press and turn the [ROTARY] knob to
select "ARE U SURE" or "CANCEL".
ARE U SURE: confirm to disconnect
the paired device.
CANCEL: cancel disconnecting the
paired device.
3. Press the [ROTARY] knob to confirm.
11