Sony Handycam CCD-TRV228E Operation Manual page 75

Video camera recorder/ digital video camera recorder
Hide thumbs Also See for Handycam CCD-TRV228E:
Table of Contents

Advertisement

Symptom
The picture in the viewfinder is not
clear.
The picture in the viewfinder has
disappeared.
Recording
Symptom
The tape does not start when you
press REC START/STOP.
The power abruptly turns off.
For
TRV428E/
TRV255E/
265E:
The SteadyShot does not function.
The auto focus does not function.
A vertical band appears when
recording candlelight or electric light
in the dark.
A vertical band appears when
recording a bright subject.
The color of the picture is not
correctly displayed.
Picture appears too bright on the
screen, and the subject does not
appear on the screen.
The shutter sound is not heard.
For
TRV428E/
TRV255E/
265E:
Black bands appear when you record
a TV screen or computer screen.
Cause and/or Corrective Actions
cUse the viewfinder lens adjustment lever to adjust the lens. (p. 16)
cClose the LCD panel. The picture is not displayed in the viewfinder
when the LCD panel is open. (p. 16)
Cause and/or Corrective Actions
cSlide the POWER switch to turn on the CAMERA lamp. (p. 15)
cThe tape has reached the end. Rewind it, or insert a new cassette.
cSet the write-protect tab to REC or insert a new cassette. (p. 81)
cThe tape is stuck to the drum due to moisture condensation. Remove the
cassette and leave your camcorder for at least 1 hour, then re-insert the
cassette. (p. 85)
• [A.SHUT OFF] in the
cWhen approximately 5 minutes have elapsed while you do not operate
your camcorder, the camcorder is automatically turned off.
Slide the POWER switch down to turn the power on again (p. 15). Or
use the AC Adaptor.
• The battery pack is discharged. (p. 12)
cSet [STEADYSHOT] to [ON] in the
(p. 50)
cSet [16:9 WIDE] to [OFF] in the
cPress FOCUS to enable auto focus. (p. 29)
cThe recording conditions are not suitable for auto focus. Adjust the focus
manually. (p. 29)
• This occurs when the contrast between the subject and the background is
too high. This is not a malfunction.
• This phenomenon is called the smear effect. This is not a malfunction.
cDeactivate the NightShot plus function. (p. 28)
cDeactivate the NightShot plus function in bright places. (p. 28)
cCancel the back light function. (p. 27)
cSet [BEEP] to [MELODY] or [NORMAL] in the
(p. 59)
cSet [STEADYSHOT] to [OFF] in the
(p. 50)
(OTHERS) menu is set to [5 min]. (p. 59)
(CAMERA SET) menu.
(CAMERA SET) menu. (p. 48)
(OTHERS) menu.
(CAMERA SET) menu.
Troubleshooting
,continued
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents