Sony Handycam CCD-TRV228E Operation Manual page 69

2
Prepare your VCR.
• Insert a cassette for recording.
• Set the input selector to input mode, if
your VCR has one.
3
Prepare your camcorder (playing
device).
• Insert a cassette for editing.
• Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4
Press MENU.
5
Turn the SEL/PUSH EXEC dial to
select (OTHERS), then press the
dial.
6
Turn the SEL/PUSH EXEC dial to
select [VIDEO EDIT], then press the
dial.
0 : 08 : 55 : 06
VIDEO EDIT
MARK 1 IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 00 : 00
SCENE 0
[ MENU ] : END
7
Turn the SEL/PUSH EXEC dial to
select [EDIT SET], then press the dial.
0 : 08 : 55 : 06
VIDEO EDIT
EDIT SET
CONTROL IR
ADJ TEST
"CUT–IN"
"CUT–OUT"
IR SETUP
PAUSEMODE
IR TEST
RETURN
[ MENU ] : END
8
Turn the SEL/PUSH EXEC dial to
select [CONTROL], then press the
dial.
0 : 08 : 55 : 06
VIDEO EDIT
EDIT SET
CONTROL IR
i. LINK
[ MENU ] : END
9
Turn the SEL/PUSH EXEC dial to
select [i.LINK] or [IR], then press the
dial.
When connecting with an i.LINK
cable
After selecting [i.LINK], go on to "Step 2:
Adjusting the synchronization of the VCR"
(p. 70).
When connecting with an A/V
connecting cable
After selecting [IR], follow the procedure
described in "To set the [IR SETUP] code"
(p. 69).
To set the [IR SETUP] code
When you connect with an A/V connecting
cable, you need to check the [IR SETUP] code
signal to see if your VCR can be operated by
your camcorder (infrared ray emitter).
Remote sensor
Infrared ray
emitter
1
Turn the SEL/PUSH EXEC dial to select
[IR SETUP], then press the dial.
2
Turn the SEL/PUSH EXEC dial to select
the [IR SETUP] code of your VCR, then
press the dial.
For the [IR SETUP] code of your VCR,
refer to "[IR SETUP] code list" (p. 65).
When there is more than one code listed for
the manufacturer of your VCR, try each
code and find the most appropriate one.
3
Turn the SEL/PUSH EXEC dial to select
[PAUSEMODE], then press the dial.
4
Turn the SEL/PUSH EXEC dial to select
the mode to cancel recording pause on
the VCR, then press the dial.
Refer to the operating instructions supplied
with your VCR for details on operation.
VCR
,continued
69
Dubbing/Editing