Introduction; Overview; Model Numbers; Intended Use - Stanley Hugs CGS-HGS-1000 User Manual

Introduction

Overview

The Hugs on MobileView software notifies the users when the Hugs Tag
battery is getting low. Placing the Hugs Tag in the charger erases all the
history data from the tag, including the Kisses® bonding and the tag
status. It also triggers MobileView to erase the specific patient admitting
information.

Model Numbers

The Hugs Tag Charger part number:
• CGS-HGS-1000
Based on the power supply outlet type:
• CGS-HGS-1000-U
• CGS-HGS-1000-E
• CGS-HGS-1000-J
• CGS-HGS-1000-UK

Intended Use

The Hugs Wi-Fi Tag Charger is intended for facility staff who are using the
Hugs Wi-Fi Tags in conjunction with the MobileView security application.

Safety Considerations

• Position any trailing wires so that they are not a trip hazard and are less
likely to get damaged.
• Check that the plug is not damaged and that the cable is properly
secured with no internal wires visible.
• Where there is evidence that the supply may not be safe, such as
damaged equipment or wiring, the supply should not be used until work
has been done to correct this.

Documentation

Please refer to the following document for technical specifications for the
Hugs Wi-Fi Tag Charger.
• Hugs Wi-Fi Tag Charger Data Sheet p/n 0971-063-000
Hugs® Wi-Fi Tag Charger User Guide
U.S. outlet
European outlet
Japanese outlet
U.K. Outlet
Introduction
1