Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Stanley Hugs CGS-HGS-1000
Summary of Contents for Stanley Hugs CGS-HGS-1000
- Page 1 Hugs Wi-Fi Tag Charger ® User Guide...
-
Page 3: Table Of Contents
Table of Contents Introduction Overview Model Numbers Intended Use Safety Considerations Documentation Orientation General Description Operating and Display Modes Installing the Charger Wall Mounted Setting Up the Charger Using the Charger Inserting the Tag into the Charger Removing the Tag from the Charger Specific Charging Capabilities Overview Dimensions and Weight... - Page 4 Maintenance Operational Checks Cleaning Instructions Supplies and Accessories Compliance and Safety Hugs® Wi-Fi Tag Charger User Guide...
-
Page 5: Introduction
Introduction Introduction Overview The Hugs on MobileView software notifies the users when the Hugs Tag battery is getting low. Placing the Hugs Tag in the charger erases all the history data from the tag, including the Kisses® bonding and the tag status. -
Page 6: Orientation
Orientation Orientation General Description This section describes the parts and LEDs on the Charger. POWER SOCKET ON/OFF SWITCH CHARGER STATUS CHARGING CHARGING METALS Power Socket The power socket is located at the top-left side of the Charger. An external power supply is provided with the Charger. For more information about the power supply, see “Supplies and Accessories”... - Page 7 Orientation ON/OFF Switch After the Charger is plugged in, press the ON/OFF switch to the ON position. When the Charger is not being used, press the switch to the OFF position. Charger Status LED The Charger status LED is located at the top-right on the front of the Charger.
- Page 8 Orientation Charging LED for Hugs Tag CHARGING LED: Yellow when the Hugs Tag is correctly placed in the Charger Each Hugs Tag impression in the Charger has its own charging LED (24 LEDs in total). There are three (3) available colors for the LEDs: GREEN, YELLOW and RED.
-
Page 9: Operating And Display Modes
Orientation Operating and Display Modes The following table describes the LED indications for the Hugs Tag Charger. Color Description GREEN Battery is fully charged. YELLOW Charging in progress. RED FLASHING Issue with the Hugs Tag. Remove and replace the tag. RED SOLID It is not necessary to unplug the Issue with the Charging slot. -
Page 10: Installing The Charger
Installing the Charger Installing the Charger The following items are included with the Hugs Tag Charger: • two (2) #6 Philips head screws • two (2) plastic wall anchors • Mounting plate Wall Mounted Establish a location on the wall for the Hugs Tag Charger. Draw two (2) holes on the wall, at a level distance 262 mm apart, from center to center. -
Page 11: Setting Up The Charger
Setting Up the Charger Setting Up the Charger Plug the supplied power cable into the power socket located on the side of the Charger. Plug the other end into the wall external outlet (at least 12VDC @ 3A). Press the ON/OFF switch to the ON position. The Charger status LED turns YELLOW indicating that the Charger is now ready for use. -
Page 12: Using The Charger
Using the Charger Using the Charger Inserting the Tag into the Charger Ensure the Hugs Tag is clean to prevent contamination to the Charger. Aim the bottom of the Hugs Tag towards the small bump located in the inferior portion of the tag impression in the Charger. Push the tag and align the band slots to the charging metals. -
Page 13: Removing The Tag From The Charger
Using the Charger Push down firmly to insert the tag into the impression. The status LED turns YELLOW, indicating that the Hugs Tag is now charging. Removing the Tag from the Charger Push the tag towards the small bump and lift the tag out of the impression. -
Page 14: Specific Charging Capabilities
Specific Charging Capabilities Specific Charging Capabilities Overview The battery charging process does not harm the Hugs Tag or its operational characteristics. Charging the Hugs Tags that are connected (up to 24 units) to the Charger takes approximately 3 hours. Once charged, the Hugs Tag can be used for approximately 2 weeks. -
Page 15: Hugs Tags States
Hugs Tags States Hugs Tags States State Description Dormant • Initial state after manufacturing • When the tag is not in use In-Charger When the Hugs Tag is placed in the charger: • The Kisses bond information is automatically cleared. •... -
Page 16: Hugs Tag Behavior With Sensor Alarm
Hugs Tags States Hugs Tag Behavior with Sensor Alarm The Hugs tag handles alarms with a priority as follows: 1. LF Exciter message (Door Exciter or Kisses) 2. Tamper event 3. Kisses mismatch event 4. Standard Wi-Fi messages 5. Proximity event 6. - Page 17 Maintenance Maintenance Operational Checks It is recommended to verify all LEDs are working by placing a Hugs Tag in each of the impressions, at least once a week. If, at any time, an LED fails to light up (even when you switch the Charger Off then On again), contact Support.
- Page 18 Maintenance Solution Manufacturer Preparation Super Edisonite S. M. Edison Chem- Per manufacturer's recommendation ical Co Vesphene® Iise Calgon Vestal Labo- Per manufacturer's recommendation ratories Manu-Klenz Calgon Vestal Labo- Per manufacturer's recommendation, ratories (0.25 – 0.5 oz/gallon water) Coverage™ HBV Calgon Vestal Labo- Per manufacturer's recommendation ratories Formula C™...
- Page 19 Supplies and Accessories Supplies and Accessories The Hugs Tag Charger is shipped with the following components: • 110/220V AC (autoselect) • External power supply: at least 12VDC @ 3A • Power cable (3 meters*) replaceable and country-specific for the following areas: ...
- Page 20 Compliance and Safety Compliance and Safety • UL 60950 • EN 60950 - Directive – RTTE (1999/5/EC) • LVD (2006/95/EC) • UL STD 294 • IEC/EN 60601-1-3 • ISO 14971 • ROHS (Directive 2011-65-EU/EC) Federal Communication Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
- Page 21 Compliance and Safety subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Hugs® Wi-Fi Tag Charger User Guide...
- Page 22 Compliance and Safety Hugs® Wi-Fi Tag Charger User Guide...
- Page 23 Hugs® Wi-Fi Tag Charger User Guide...
- Page 24 Healthcare is proud to be part of Stanley Black & Decker, Inc. For more information, visit www.stanleyhealthcare.com. STANLEY Healthcare Phone: +1-888-622-6992 130 Turner Street, Waltham, MA 02453 Email: stanleyhealthcare@sbdinc.com © 2013 STANLEY Healthcare. All rights reserved. Doc Part # 0980-041-000 Rev 01. 07/2013.