Installing The Charger; Wall Mounted - Stanley Hugs CGS-HGS-1000 User Manual

Installing the Charger

Installing the Charger
The following items are included with the Hugs Tag Charger:
• two (2) #6 Philips head screws
• two (2) plastic wall anchors
• Mounting plate

Wall Mounted

1. Establish a location on the wall for the Hugs Tag Charger.
2. Draw two (2) holes on the wall, at a level distance 262 mm apart,
from center to center.
3. Drill two holes at the marked locations on the wall.
4. Insert the plastic wall anchors in the drilled holes.
5. Mount the plate and align the anchor holes with the wall anchors.
6. Using the supplied Philips head screws, securely screw the plate to
the wall.
7. Optionally, use wood screws or other suitable wall mount hardware
in the remaining holes on the plate.
8. Slide the Hugs Tag Charger onto the plate to mount it on the wall.
6
Hugs® Wi-Fi Tag Charger User Guide