Mower Assembly; Check Torque - Mower Blades - Snapper ZTR 800X Series Dealer Setup & Adjustment Instructions Manual

800X Series Zero-Turn Rider - 61" & 72" Mower Deck
Check Mower Assembly

Check Torque - Mower Blades

WARNING
Avoid injury! Mower blades are sharp.
• Mower blades are sharp. For your personnal safety, do
NOT handle mower blades with bare hands.
• Careless or improper handling of blades may result in
serious injury.
• Blade mounting bolts must each be installed with a flat
washer then securely tightened. Torque blade mounting
bolts to 120 ft.lbs (163 Nm).
1. Check that blades are installed with the tabs pointing up
towards the deck as shown in Figure 14. Torque bolts
to 120 ft.lbs. (63 Nm).
8
D
TIGHTEN
Figure 14. Tightening the Mower Blade for Installation
A. Mower Blade Mounting Bolt
B. Flat Washer
C. Mower Blade Air Lift (Points Up)
D. 4 X 4 Wooden Block
ferrismowers.com | snapperpro.com
B
A