Table of Contents
Advertisement
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
ZERO TURNING HYDRO DRIVE
Model ZM2200K shown
(Rev. 6, 09/25/02)
MID MOUNT Z-RIDER
Parts Manual for
SERIES 0,1,2
POWER UNIT MODELS
ZM2200K
ZM2500KH
ZMT2500KH
MZM2200KH
MZM2300KH
ZM2501KH
MZM2301KH
ZM2502KH
MOWER UNIT MODELS
ZM5200M
ZM6100M
ZM5201M
ZM6101M
ZM5202M
ZM6102M
MANUAL No. 06110
TM
Advertisement
Table of Contents
Related Manuals for Snapper Z-RIDER ZM2200K
Summary of Contents for Snapper Z-RIDER ZM2200K
- Page 1 ZERO TURNING HYDRO DRIVE SERIES 0,1,2 POWER UNIT MODELS ZM2200K ZM2500KH ZMT2500KH MZM2200KH MZM2300KH ZM2501KH MZM2301KH ZM2502KH MOWER UNIT MODELS ZM5200M ZM6100M ZM5201M ZM6101M ZM5202M ZM6102M Model ZM2200K shown COPYRIGHT © 2002 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 6, 09/25/02) MANUAL No. 06110...
-
Page 2: Table Of Contents
ENGINE SUB-ASSEMBLY .......................4, 5 FUEL TANK ASSEMBLY ......................6, 7 TANDEM HYDRO TRANSAXLE ASS’Y (Models ZM2200K, ZM2500KH) ......8, 9 TANDEM HYDRO TRANSAXLE ASS’Y (All Models Except ZM2200K, ZM2500KH) ..10, 11 FOOTREST ASSEMBLY ......................12, 13 HYDRO RESERVOIR ASSEMBLY ..................14, 15 UPPER CHASSIS AND SEAT LATCH ASSEMBLY ..............16 CASTER WHEEL ASSEMBLY....................17... -
Page 3: Drive Tire/Wheel Assembly
DRIVE TIRE/WHEEL ASSEMBLY ASSEMBLY 2, 2A, 2B 8, 8A 3, 3A L. H. TRANSAXLE ASSEMBLY (See Pages 8 thru 11) ITEM PART NO. DESCRIPTION 5-4526 ASSEMBLY, Rear Tire & Rim (Includes Item 2, 3 & 4) 5-7706 ASSEMBLY, Rear Tire & Rim (Left Hand) (Model MZM2200KH Only) (Includes Item 2A, 3A &... -
Page 4: Engine Sub-Assembly
ENGINE SUB-ASSEMBLY MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 5 ENGINE SUB-ASSEMBLY ITEM PART NO. DESCRIPTION ENGINE, 22HP (Kohler No. CH22S PS-66536) ENGINE, 23HP (Kohler No. CH23S PS-76536) ENGINE, 25HP (Kohler No. CH25S PS-68577) 3-5638 J-CLIP, 3/8” Cushioned (2) 9-1523 SCREW, 5/16-18 x 5/8” Hex Washer Self Tap (2) 9-1299 NUT, 3/8-16 Nyloc (4) 9-1553 SCREW, 3/8-16 x 1-3/4”...
-
Page 6: Fuel Tank Assembly
FUEL TANK ASSEMBLY 20 & 21 MANUAL No. 06110 MID MOUNT Z-RIDER... -
Page 7: Fuel Tank Assembly
FUEL TANK ASSEMBLY ITEM PART NO. DESCRIPTION 2-8903 CAP, 3-1/2” Fuel (2) 5-4430 FUEL TANK, Main (Includes Item 1 - Fuel Cap) 5-7705 FUEL TANK, Main (Includes Item 1 - Fuel Cap) (MZM2200KH Models Only) (Includes Fuel Gauge) 2-6746 TRIM, 2 Inch (3) 9-1508 BOLT, 5/16-18 x 3/4”... -
Page 8: Tandem Hydro Transaxle Ass'y (Models Zm2200K, Zm2500Kh)
TANDEM HYDRO TRANSAXLE ASSEMBLY (Models ZM2200K, ZM2500KH) NOTE: HYDRO TRANSAXLE MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORISED SNAPPER DEALER. PULLEY MOUNTING DETAIL FOR R. H. HYDRO MODULE MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 9 ROD, Roll Release (2) 9-1629 COTTER-PIN, 1/16 x 1/2” (2) 9-1786 BOLT, 3/8-16 x 4-3/4” Grade 5 (4) 7-2017 SPACER, Eaton Transaxle (8) NOTE: HYDRO TRANSXALE MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SNAPPER DEALER. MID MOUNT Z-RIDER MANUAL No. 06110...
-
Page 10: Tandem Hydro Transaxle Ass'y (All Models Except Zm2200K, Zm2500Kh)
TANDEM HYDRO TRANSAXLE ASSEMBLY (All Models Except ZM2200K, ZM2500KH) NOTE: HYDRO TRANSAXLE MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORISED SNAPPER DEALER. PULLEY MOUNTING DETAIL FOR R. H. HYDRO MODULE MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 11 TANDEM HYDRO TRANSAXLE ASSEMBLY (All Models Except ZM2200K, ZM2500KH) ITEM PART NO. DESCRIPTION 5-4437 ASS’Y, Eaton Transaxle 771B (L.H.) Side (shown) 5-9154 ASS’Y, Eaton Transaxle 771-090 (L.H.) (w/needle bearings) 5-4436 ASS’Y, Eaton Transaxle 771A (R.H.) Side 5-9153 ASS’Y, Eaton Transaxle 771-089 (R.H.) Side (w/needle bearings) 9-1514 WASHER, 13/32 I.D.
-
Page 12: Footrest Assembly
FOOTREST ASSEMBLY MANUAL No. 06110 MID MOUNT Z RIDER... -
Page 13: Footrest Assembly
FOOTREST ASSEMBLY ITEM PART NO. DESCRIPTION 4-6727 BRACKET, Floor Pan 5-8362 WELDMENT, Floor Pan (Model ZMT2500KH only!) 4-3843 PAD Left Hand Friction 9-1318 SCREW, 5/16-18 x 3/4” Hex Head Cap 9-1296 WASHER, 11/32” Flat Lock 4-3795 BRACKET, Left Hand Footrest 9-1298 NUT, 5/16-18 Hex Nylon Insert (2) 4-3800... -
Page 14: Hydro Reservoir Assembly
HYDRO RESERVOIR ASSEMBLY (left hand) VIEWED FROM UNDERNEATH ASSEMBLY ITEM PART NO. DESCRIPTION 5-4103 RESERVOIR, L. H. Hydro (includes cap, item 2) 3-5512 CAP, Reservoir 1-6130 CLAMP, for 13/16” Hose (8) 3-5514 HOSE, Rubber 5/8 I. D. x 13-1/2” long 4-4788 HOSE, Rubber 5/8”... - Page 15 HYDRO RESERVOIR ASSEMBLY (right hand) VIEWED FROM ASSEMBLY UNDERNEATH ITEM PART NO. DESCRIPTION 5-4521 RESERVOIR, (R.H.) Hydro (Includes cap, item 2) 4-4789 HOSE, Rubber 5/8” I.D. 32” Long 4-4787 HOSE, Rubber 5/8” I.D. 12” Long 4-4791 BRACKET, Tank, (Right Hand) 9-1523 SCREW, 5/16-18 x 5/8”...
-
Page 16: Upper Chassis And Seat Latch Assembly
UPPER CHASSIS AND SEAT LATCH ASSEMBLY ITEM PART NO. DESCRIPTION 4-2946 UPPER CHASSIS (Models MZM2200K, ZM2501KH, ZM2502KH) 7-1940 UPPER CHASSIS (Models ZMT2500KH & ZMT2501KH) (not shown) 9-1298 NUT, 5/16-18 Hex Nyloc 3-5993 LATCH, Seat Support 7-2106 LATCH, Seat Support (MZM2300K, ZMT2500KH, ZM2501KH ZM2502KH) 9-1800 BOLT, 5/16-18 Shoulder, Hex Head, Nylon Patch 2-6292... -
Page 17: Caster Wheel Assembly
CASTER WHEEL ASSEMBLY ITEM PART NO. DESCRIPTION 9-0361 SCREW, 5/16-18 x 5/8” Hex Flange Self Tap 3-6578 CAP, Caster Shaft 1-0965 RING, 1-3/16” External Retaining 9-1795 WASHER, 1-1/4” Flat 3-5602 BEARING, 30mm x 62mm (2) 4-2590 WELDMENT, Caster Support 5-8760 WELDMENT, Caster Support (5 degree) (used on model ZMT2500KH only) 4-2591... -
Page 18: Lower Chassis/Caster Wheel Assembly
LOWER CHASSIS/CASTER WHEEL ASSEMBLY NOTE: This wheel assembly contains all items from page 17 except for items 5 and 6. NOTE: Front axle assembly (5-4602) contains one item 12B as well as six items 18 and three items 19. VIEWED FROM UNDERNEATH MANUAL No. -
Page 19: Lower Chassis/Caster Wheel Assembly
LOWER CHASSIS/CASTER WHEEL ASSEMBLY ITEM PART NO. DESCRIPTION 9-0361 SCREW, 5/16-18 x 5/8” Hex Flange Self Tap 3-6578 CAP, Caster Shaft 1-0965 RING, 1-3/16” External Retaining 9-1795 WASHER, 1-1/4” I.D. x 1-7/8” O.D. Flat (2) 3-5602 BEARING, 30 mm x 62 mm (2) 5-4507 CASTER WHEEL (2) (see page 17) 9-1888... -
Page 20: Joystick Control Assembly (All Except For Zmt2500Kh)
JOYSTICK CONTROL ASSEMBLY (All Models except ZMT2500KH) MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 21 JOYSTICK CONTROL ASSEMBLY (All Models except ZMT2500KH) ITEM PART NO. DESCRIPTION 9-1809 COTTER PIN, 1/8” x 1-1/4” (3) 4-3881 SHAFT, Hydro Left Hand 4-2638 ARM/HUB Weldment (4) 9-1298 NUT, 5/16-18 Hex Nyloc (7) 7-3060 PLATE, Hydro Shaft (2) 1-1791 RETAINER, 5/16” Bolt (2) 9-1296 WASHER, 11/32”...
-
Page 22: Twin Stick Control Assembly (Model Zmt2500Kh)
TWIN STICK CONTROL ASSEMBLY (Model ZMT2500KH) MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 23 TWIN STICK CONTROL ASSEMBLY (Model ZMT2500KH) ITEM PART NO. DESCRIPTION 1-0061 KEY, 3/16” Square x 1” 1-0739 RING, 5/8” External Retaining 1-1791 RETAINER, 5/16” Bolt (2) 1-3072 ROLL PIN, 1/4” x 1” (5) 1-3874 BUSHING, 5/8 I. D. x 5/8” (5) 2-3556 BUSHING, Caster 3-5532...
-
Page 24: Parking Brake Assembly
PARKING BRAKE ASSEMBLY MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 25 PARKING BRAKE ASSEMBLY ITEM PART NO. DESCRIPTION 1-2068 RING, Rear Lift Arm (3) 2-6420 GRIP, Flat Bar (Models ZM2200K & ZM2500K) 7-2222 GRIP, Park Brake Lever (Models ZMT2500KH, MZM2200KH, MZM2300K, ZM2501KH, ZM2502KH) 4-6451 SWIVEL, Adjustable 1-0935 WASHER, 3/4” I.D. x 1-1/8” O.D. x 1/16 Thick, Flat...
-
Page 26: Seat Support Assembly
SEAT SUPPORT ASSEMBLY ADJUSTER WITH LOCK See Pages 44 and 45 9, 9A MANUAL No. 06110 MID MOUNT Z-RIDER... -
Page 27: Seat Support Assembly
SEAT SUPPORT ASSEMBLY ITEM PART NO. DESCRIPTION 1-5761 BOLT, 5/16-18 x 3/4” Shoulder (2) 2-3354 SWITCH, Seat (Normally Closed) 9-0951 NUT, 5/16-18 Hex Flange Lock (2) 3-6492 SPRING (2) 9-2007 SPRING (Models MZM2200KH, MZM2300K & ZMT2500KH Only) 2-2793 BUSHING, Molded Seat, 1/2 I.D. x 5/8” O.D. (2) 2-2794 SPACER, 5/16 I.D. -
Page 28: Fender/Control Cable Assembly
FENDER/CONTROL CABLE ASSEMBLY 17 18 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 3-5548 HANDLE, 5/8” Tubing 4-4820 BRACKET, Instrument Panel 3-5940 PLATE, Joystick Control (shown) (shown) 4-6863 BRACKET, Instrument Panel 7-2043 COVER, Joystick Hole (Model (MZM Models Only) ZMT2500KH Only) 9-0913 SCREW, #10-24 x 1/2”... -
Page 29: Cutter Housing Assembly
CUTTER HOUSING ASSEMBLY ITEM PART NO. DESCRIPTION 2-9422 BEARING, Sealed (2) 2-9270 WASHER, Spindle 2-9274 SNAP-RING, Spindle Shaft 5-9311 SHAFT, Spindle 2-9254 SPACER, Bearing 2-9271 SPACER, Blade (4) 2-9246 BLADE, 18” (ZM5200M Mower) 7-3395 BLADE, Low Lift 18” (ZM5201M, ZM5202M Mower) 1-7037 BLADE, High Lift 18”... -
Page 30: Upper Drive Shaft Assembly
UPPER DRIVE SHAFT ASSEMBLY See pages 8 thru 11, item 24 MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 31 UPPER DRIVE SHAFT ASSEMBLY ITEM PART NO. DESCRIPTION 1-4338 DISC, Flexible 1-4803 SPACER, Coupling (2) 4-7225 FLANGE, Bearing (2) (requires Item 18A, order separately) (Models MZM2200K & MZM2300K) 1-8626 HUB, Drive Shaft Adapter 3-2070 WASHER, 13/32 I.D. x 3/4 O.D., Flat (4) 4-5254 BELT, Traction Drive (AX Cogged, 34.35 Eff.
-
Page 32: Deck Driveshaft Assembly (All Except For Mzm Models)
DECK DRIVESHAFT ASSEMBLY (Except for MZM Models) MOUNTS TO LOWER FRAME MIDDLE BRACE SEE NEXT PAGE COMPONENT OF LOWER FRAME WELDMENT SEE NEXT PAGE NOTE: ITEM 12 ALSO MOUNTS TO LEFT & RIGHT TRANSAXLES SEE PAGES 8 THRU 11 7A, 7B MOUNTS TO ENGINE BASE SEE NEXT PAGE MANUAL No. - Page 33 DECK DRIVESHAFT ASSEMBLY (Except for MZM Models) LOWER FRAME WELDMENT ENGINE BASE LOWER FRAME MIDDLE BRACE ITEM PART NO. DESCRIPTION 1-2315 KEY, 1/4 x 2” Square 1-3324 FITTING, Lube (45 degree, for 3/16” hole) 1-4409 BUSHING (2) 4-7227 BEARING, 1” I.D. (2) 9-0990 BOLT, 3/8-16 x 2”...
-
Page 34: Deck Driveshaft Assembly (Mzm Models)
DECK DRIVESHAFT ASSEMBLY (MZM Models) MOUNTS TO LOWER FRAME MIDDLE BRACE SEE NEXT PAGE COMPONENT OF LOWER FRAME WELDMENT SEE NEXT PAGE NOTE: ITEM 12 ALSO MOUNTS TO LEFT & RIGHT TRANSAXLES SEE PAGES 8 THRU 11 MOUNTS TO ENGINE BASE SEE NEXT PAGE MANUAL No. - Page 35 DECK DRIVESHAFT ASSEMBLY (MZM Models) LOWER FRAME WELDMENT ENGINE BASE LOWER FRAME MIDDLE BRACE ITEM PART NO. DESCRIPTION 1-2315 KEY, 1/4 x 2” Square 1-3324 FITTING, Lube (45 degree, for 3/16” hole) 1-4409 BUSHING (2) 4-7227 BEARING, 1” I.D. (2) 9-0990 BOLT, 3/8-16 x 2”...
-
Page 36: Deck Lift System
DECK LIFT SYSTEM 8, 8A MANUAL No. 06110 MID MOUNT Z-RIDER... -
Page 37: Deck Lift System
DECK LIFT SYSTEM ITEM PART NO. DESCRIPTION 1-4354 WASHER, 29/32” I.D. x 1-1/4” O.D. 1-5020 RING, 7/8” External Retaining 3-4453 WASHER, 25/32” x 1-1/2” Flat (ZM Series 0 Models Only) (2) 4-3801 BRACKET, Deck Height Quadrant 4-3803 BRACKET, Deck Support (4) 4-3819 PLATE, Rear Link (4.95”... -
Page 38: 52" Deck, Idlers, Rollers
52” DECK, IDLERS, ROLLERS MANUAL No. 06110 MID MOUNT Z-RIDER... -
Page 39: Deck, Idlers, Rollers
52” DECK, IDLERS, ROLLERS ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 5-8342 GEARBOX, Right Angle 9-1899 SCREW, 3/8-24 x 1” Cap, Gr. 5 (Peerless Series 1000-52) 9-1331 WASHER, 13/32” Flat (2) 9-1328 SCREW, 3/8-16 x 1-1/4” Gr. 5(2) 9-1802 SET-SCREW, 5/16”... -
Page 40: 61" Deck, Idlers, Rollers
61” DECK, IDLERS, ROLLERS MANUAL No. 06110 MID MOUNT Z-RIDER... -
Page 41: Deck, Idlers, Rollers
61” DECK, IDLERS, ROLLERS ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 5-8342 GEARBOX, Right Angle 9-1899 SCREW, 3/8-24 x 1” Cap, Gr. 5 (Peerless Series 1000-52) 9-1331 WASHER, 13/32” Flat (2) 9-1328 SCREW, 3/8-16 x 1-1/4” Gr. 5(2) 9-1802 SET-SCREW, 5/16”... -
Page 42: Chute, Deck Covers & Baffle
CHUTE, DECK COVERS & BAFFLE FRONT AXLE (Page 18, Item 12A) REAR LINK PLATE (See Pages 36 and 37) FRONT LINK PLATE (See Pages 36 and 37) DECK (See Pages 38 thru 41) NOTE: Item 16 not used with Wide Stance Front Axle MANUAL No. -
Page 43: Chute, Deck Covers & Baffle
CHUTE, DECK COVERS & BAFFLE ITEM PART NO. DESCRIPTION 9-1587 WASHER, 17/32 x 1-1/16 Flat (10) 4-3824 BRACKET, Rear Lift (2) 9-1299 NUT, 3/8-16 Hex (12) 9-1516 PIN, 5/32 x 1” Cotter (8) 9-1948 PIN, 1/2 x 23/32 Clevis (6) 4-4670 BRACKET, Front Lift (2) 9-1304... -
Page 44: Seat Assembly (All Except For Mzm Models)
SEAT ASSEMBLY (Except for MZM2200K & MZM2300KH) MANUAL No. 06110 MID MOUNT Z-RIDER... - Page 45 SEAT ASSEMBLY (Except for MZM2200K & MZM2300KH) ITEM PART NO. DESCRIPTION 5-4117 SEAT ASSEMBLY (Includes indented items below) PAN, Complete 3-6476 CUSHION, Seat 3-6477 CUSHION, Back 4-4724 BRACKET, Armrest (Right Hand 3-5568 BRACKET, Armrest (Left Hand) 3-6478 CHANNEL, Armrest 3-6479 ARM PAD, Grey (2) 3-6484 ADJUSTER (with lock)
-
Page 46: Seat Assembly (Mzm Models)
SEAT ASSEMBLY (MZM Models) ASSEMBLY (for components See Seat Support Assembly pages) ITEM PART NO. DESCRIPTION 4-7036 ASSEMBLY, Seat Support 4-4897 SEAT, Milco High Back 7-2401 BRACKET, Armrest (Painted) (2) 4-4855 ARM REST (2) 9-1523 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap (4) 7-2106 LATCH, Seat Support 9-1800... -
Page 47: Traction Drive Idler Assembly
TRACTION DRIVE IDLER ASSEMBLY ITEM PART NO. DESCRIPTION 1-3324 FITTING, 3/16 Lube (2) 1-4409 BUSHING, 9/16 I.D., 3/4” O.D. (4) 1-8573 PULLEY, Idler 3.48 O.D. (2) 1-9109 COVER, Spring (Rubber) (2) 1-9348 CLIP, Seat Cushion (2) 9-1804 WASHER, 9/16 Flat (Type B) (4) 4-4765 SPRING, Torsion 3-5812... -
Page 48: Decals
DECALS ITEM PART NO. DESCRIPTION 3-5847 LOGO, Side 24.5” Long 3-5848 LOGO, Front 16.33” Long 7-3603 DECAL, Control Panel (MZM Models) 7-3604 DECAL, Control Panel 4-4757 DECAL, Control Panel (not shown) 4-6425 DECAL, Control Panel (not shown) 4-5122 DECAL, Pro Cruiser 2-9470 DECAL, Patent Numbers 7-2444... -
Page 49: Decals
ITEM PART NO. DESCRIPTION 7-3601 DECAL, Throttle/Choke 7-2446 DECAL, Throttle/Choke Twin Stick (not shown) 7-3647 DECAL, Danger Guard/Catcher 4-4640 DECAL, Nameplate Snapper 1-3010 DECAL, Warning (Cut-Finger) 2-2522 DECAL, Warning 4-5107 DECAL, Park Brake 4-4793 DECAL, Deck Size (52” only) 4-4794 DECAL, Deck Size (61”... -
Page 50: Electrical Components (Except Wiring)
ELECTRICAL COMPONENTS (except wiring) (NEGATIVE) BLACK (POSITIVE) BLUE ORANGE BLUE/WHITE YELLOW (TO FUSE (JUMPER) BOX) YELLOW ORANGE YELLOW BLUE (S) GREEN BLUE/WHITE WHITE (NEGATIVE) ORANGE PURPLE (M) (POSITIVE) RED (B) ORANGE (L) GREEN (G) PINK BLUE/WHITE ORANGE ORANGE (POSITIVE) PURPLE BROWN (NEGATIVE) MANUAL No. -
Page 51: Electrical Components (Except Wiring)
ELECTRICAL COMPONENTS (except wiring) ITEM PART NO. DESCRIPTION 2-6343 SWITCH, Ignition- After Fire Solenoid 1-6132 SPACER, 5/8” 9-1546 WASHER, 5/8” Internal Tooth Lock 1-2685 NUT, 5/8-32 Hex 2-3506 BEZEL 1-1138 KEY, and Ring 2-3355 SWITCH, DPDT 9-1240 SCREW, #10-32 x 5/8” Hex Machine, Grade. 5 (2) 9-0376 NUT, #10-32 Hex Nyloc (2) 1-9547... -
Page 52: Wiring Harness
WIRING HARNESS (Non-MZM Models) TO STARTER SOLENOID TO NEG. TO PTO BATTERY TERMINAL TO CONTROL PANEL HARNESS (GREEN WIRE) TO STARTER SOLENOID TO ENGINE TO GROUND (ENGINE BASE) BATTERY TO CONTROL PANEL HARNESS (BLACK WIRE) TO POS. BATTERY TERMINAL TO L.H. LIGHT FUSES TO PTO SWITCH TO LIGHT SWITCH... -
Page 53: Wiring Schematics
WIRING SCHEMATIC (Non-MZM Models) MID MOUNT Z-RIDER MANUAL No. 06110... -
Page 54: Wiring Harness
WIRING HARNESS (MZM Models) TO STARTER SOLENOID TO NEG. BATTERY TERMINAL TO PTO TO CONTROL PANEL HARNESS (GREEN WIRE) TO STARTER SOLENOID TO ENGINE TO GROUND (ENGINE BASE) BATTERY TO CONTROL PANEL HARNESS (BLACK WIRE) TO POS. BATTERY TERMINAL FUSES TO PTO SWITCH TO SEAT SWITCH... - Page 55 WIRING SCHEMATIC (MZM Models) MID MOUNT Z-RIDER MANUAL No. 06110...
- Page 56 ZERO TURNING HYDRO DRIVE SERIES 0, 1, 2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.