Using an Optional Microphone
To use a long microphone such as the optional ECM-
670/672, remove the supplied microphone holder, and
fit an optional CAC-12 Microphone Holder to the
camcorder, then mount the microphone in this holder.
Removing the supplied microphone
holder
Remove the two microphone holder retaining screws
(M4 6) from the viewfinder, remove the microphone
holder, then replace the screws in their original
positions.
Microphone
M4
6 screws
holder
Fitting an optional microphone
Use the following procedure to attach an optional
ECM-670 Microphone.
1
Loosen the screw of the CAC-
12 Microphone Holder, then
open the holder and replace the
microphone adaptor with the
one supplied with the ECM-
670 Microphone.
Fitting the optional CAC-12 Microphone
Holder
Remove the two retaining screws (M3 8) for the
optional microphone holder, then use these screws to
attach the CAC-12 Microphone Holder.
CAC-12
Chapter 2 Fitting and Connections
Screws removed from the
camcorder
Microphone adaptor
(Continued)
35