Fitting To A Tripod - Sony 300PF Operating Instructions Manual

Fitting to a Tripod

First fit the VCT-U14 Tripod Adaptor to the tripod,
then mount the camcorder on the tripod adaptor.
VCT-U14 Tripod Adaptor
Side the camcorder forward
along the slot, until it clicks
firmly into place.
Removal
Note
After removing the camcorder, if the tripod adaptor pin
Tripod
has not returned to its original position, hold down the
red button and move the lever in the direction of the
arrow to return the pin to its original position. It is not
possible to mount a camcorder with the pin left out.
Hold down the red button
and pull the lever in the
direction of the arrow.
Pin
Chapter 2 Fitting and Connections
41