Fitting The Lens - Sony 300PF Operating Instructions Manual

Fitting the Lens

In the case of the DSR-300K/300PK/300F/300PF
model, the lens is already fitted. In other cases, use the
following procedure to fit the lens.
1
Remove the retaining rubber
which prevents the lens mount
from coming loose, then raise
the lens fixing lever, and
remove the lens mount cap.
2
With the lens fixing lever
turned fully counterclockwise,
push in the lens, aligning the
projection on the lens with the
cutout on the camcorder.
3
Supporting the lens, turn the
lens fixing lever fully
clockwise. Replace the
retaining rubber on the lens
mount.
32
Chapter 2 Fitting and Connections
Note
Be sure to turn off the power before fitting the lens.
Retaining rubber
Lens mount cap
Align and push in.
Lens fixing lever