Troubleshooting Control Solution Test - ReliOn MICRO User Instruction

Troubleshooting Control Solution Test

If the control solution test result is out-of-range, check the following
and repeat the test.
Check
Did you do the test in
control solution mode?
Do you see 'CONT' on
the screen with the result?
Have the test strips and/or
control solution expired?
Were control solutions at room
temperature (72–82°F [22–28°C])
when used?
Does the code on the test strip bottle
match the code on the meter screen?
62
If not, do the test again.
Insert a test strip; press the
for control solution mode.
'CONT' should appear on the screen.
A 'CONT' flag can also be attached
when results are shown on the screen.
Make sure the test strips and control
solutions are not past the expiration date.
This date is shown on bottle.
If not, warm up/cool down
to room temperature.
If not, obtain a new bottle of test strips.
Action
button