User Data For "Division Increment" Function - Siemens SINUMERIK 880 SW 6 Planning Manual

05.91
Data Unit
Channel number
Axis number
Position Units of input
resolution
Feedrate (G94) 0.001 mm/min
0.0001 inch/min
Feedrate (G95) 0.001 mm/rev
0.0001 inch/rev
Preparatory
function

14.4.2 User data for "division increment" function

Function number 2 (DW are in the user interface).
All values in fixed-point format (binary with sign).
Useful data
DB/DX
Bit 15
DW x
DW x+1 Channel number
DW x+2
DW x+3
DW x+4
DW x+5
Overview of user data for "division increment" function
© Siemens AG 1991 All Rights Reserved
SINUMERIK 880 (PJ)
Limits
– 1...16
– 1...24
Software limit switch +
Software limit switch –
MD 280*:
Max. axial speed
– Bit 8: 0: G90
1: G91
Bit 9: 0: G94
1: G95
Bit 10: 1: G68
0: G01
DL
Length in words: 5
± Division number
Axial feedrate
G68 G90
/91
6ZB5 410-0HE02
14 Command Channel (DB 41)
14.4.1 User data for "path dimension" function
In the case of
feedrate with G95
the "Thread cutting
and revolutional
feedrate" Option
must be available.
DR
Bit 0
Axis number
Reserved
14–9