Bike Case; Scope Of Delivery; Anti Shock Frame (Asf) Assembly; Packing The Bike - Bowers & Wilkins 96002 Manual

B&W
ˆ
‰
† ‡ …
ƒ
Š „
hinten
vorne
Langloch
6

1. bike case

1.1

Scope of delivery

1. ASF frame
2. Rear mount
3. Front mount
4. Extension
5. ASF screws
6. Adapter for front and rear
quick-release levers
7. Spacer discs
8. Two wheel bags
9. bike case
10. Two keys

‚
1.2
Should you require adapters for
i
the full-floating axle system of your
mountain bike, please contact us
at info@b-w-international.com or
+49-(0)5451/8946-0.

Anti Shock Frame (ASF) assembly

1.3
Place the bike case on the ground and
open it.
Take the accessories out and place them
on the floor so you have them readily
available as you prepare the bike for ship-
ment.
1.4
Assemble the parts of the ASF as shown in
the illustration.
Please note that there are several posi-
tions for mounting the front wheel forks.
By sliding the mounting element in the
slotted hole on the extension, the ASF can
be adjusted to different wheel bases. Do
not turn the screw connectors very tightly
otherwise you will need to readjust the
setting when you pack the bike.
1.5
Insert the right adapter into the mounting
element for your bike's axle system.
The mounting elements for the most
widespread quick-release systems are
included in the scope of delivery.
Should you require adapters for the full-
i
floating axle system of your mountain
bike, please contact us at info@b-w-inter-
national.com or +49-(0)5451/8946-0.
You will need a helping hand for the first
a
adjustment of the ASF. Ask someone to
assist you otherwise damages may be
caused.

Packing the bike

1.6
Switch to the large chain wheel at the
front and the smallest pinion on the back.
This provides some protection against the
sharp edges of the chain wheel.
1.7
Keep a special pedal key or a long Allen
wrench ready and unscrew the pedals.
The right pedal has a typical right thread
and is released in an anticlockwise direc-
tion. Please note that the pedals release
with a jerk. Therefore use an angled
wrench and position the tool so that your
hands move away from the sharp teeth of
the chain wheel when you turn the right
pedal to release.
1.8
For pedals with an inner hexagon, insert
the tool from the inside of the crank into
the pedal axle. Make sure that the tool
is fully inserted. Apply the bike brakes
and step on the rear key until the pedal
releases.
In contrast, the left pedal has left thread
and is therefore opened in a clockwise
direction.
bike case B&W
7