Assembly On Arrival; Foldon Case; Scope Of Delivery; Packing The Bike - Bowers & Wilkins 96002 Manual

B&W bike bag
BicyclE usEr maNual
OpEratiNg iNstructiONs EN 14766
Read pages Perform the functional Observe the
6 and 7 before check on pages 8 and 9 bike card on
your first ride! before every ride! the rear
mtB/crOss
Full-suspENsiON
Hardtail
BICYCLE USER MANUAL
OPERATING INSTRUCTIONS EN 14781
Perform the functional
Read pages Observe the
6 and 7 before check on pages 8 and 9 bike card on
your rst ride! before every ride! the rear
ROAD RACING
CYCLOCROSS
TRIATHLON
TIME TRIAL
38
Insert the bottles into the holder on the
i
frame so you do not forget them.
3.1
Close the bike bag. Secure both straps
with a little padlock if necessary or with a
key ring (possibly with both) so that the
zip cannot be open without you wanting.
Keep your key ready for the security checks
i
in case you need to open the bike bag
again.
3.2
Insert your business card or a note with
your address in the little address pocket.
Please generally check before travelling
A
with your bike in the bike bag whether
damage to the frame or other components
can occur due to vibrations or gravita-
tional forces during transport. Therefore,
please do not place any loose objects
or tools in the bike bag and you should
decide yourself whether it is necessary to
use additional padding material.

Assembly on arrival

Assemble the bike in the reverse order to dis-
mantling.
cover!!
3.4
Read the information in your general bike
instruction manual on setting the relevant
components and especially the informa-
tion on correct fixing of components
(screw torque).
EN
Perform the "before each ride" check after
g
assembly.
This manual cannot teach you the skills of
g
cover!!
a bicycle mechanic or fitter. If you are un-
certain, please contact a local bike retailer
or a training workshop.
EN

4. foldon case

4.1

Scope of delivery

•
foldon case
•
Two keys

Packing the bike

Fold your Brompton Bike or the Frog model from
Riese und Müller according to the manufacturer's
instructions. Information on folding and unfold-
ing your bike can be found in the manufacturer's
instructions for your folding bike.
4.2
Lie the foldon case down and open it.
Place the prepared bike in the B&W foldon
case. Protect the critical areas with ad-
ditional foam.
Wrap air cushion film around the bike if
necessary so that the slightly oily chain is
isolated from the rest of the freight.
If required, the available inside size can be
i
increased by removing a layer of foam.
4.3
Close the foldon case while it is lying on
the ground and make sure that nothing
gets caught. Pressure must not have to be
applied, otherwise you will have to move
the freight around slightly. Close the locks.
4.4
Put the foldon case upright and tie the
lashing straps around the foldon case. This
means that if the locks fail, the B&W lash-
ing strap still holds the freight together.
You can find further information at:
i
BROMPTON: http://www.brompton.co.uk
RIESE UND MÜLLER: http://www.en.r-m.de
B&W
39