Upgrading Slave Access Points - Grandstream Networks GWN7600 User Manual

Automatic Upgrade
X Hours
Hour of Day (0-23)
Day of Week
Upgrade Now
Download Configuration
Upload Configuration
Reboot
Factory Reset

Upgrading Slave Access Points

When the GWN7610/GWN7600/GWN7600LR
GWN7610/GWN7600/GWN7600LR Access Point acting as Controller, users can upgrade their paired
access points from the GWN7610/GWN7600/GWN7600LR Master Controller.
Set automatic upgrade every intervals/day/week. The device will
request to upgrade automatically according to the setup time. The
default setting is Disabled
Select the time period to check for firmware upgrade.
This field is available when select "Check every X Hours" in
"Automatic Upgrade"
Defines the hour of the day (0-23) to check the HTTP/TFTP server
for firmware upgrade or configuration file changes.
This field is available when select "Check at Hour of Day" and
"Check at Day of Week" in "Automatic Upgrade"
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrade or configuration file changes.
This field is available when select "Check at Day of Week" in
"Automatic Upgrade"
Click on
device will reboot after downloading the firmware.
Note: Please save and apply your configuration first if there are any
configuration modification.
Click on
configuration file to PC.
Click on
the config; after succeeding, the device will reboot automatically.
Click on
Click on
factory default settings.
is
GWN7610/GWN7600/GWN7600LR User Manual
Version 1.0.8.18
button to begin the upgrade. Note that the
button to download
to select a compressed config file to restore
button to reboot device.
to restore the device and all online APs to
being paired as slave
the device
using another
P a g e | 98