Upgrading And Provisioning; Upgrading Firmware; Upgrading Via Web Gui; Upgrading Slave Access Points - Grandstream Networks GWN76 Series User Manual

The following table describes the notifications configuration settings:
Filed
Memory Usage
AP Throughput
SSID Throughput
Admin Password
Change
Firmware upgrade
Rogue AP
AP Offline

UPGRADING AND PROVISIONING

Upgrading Firmware

The GWN76XX can be upgraded to a new firmware version remotely or locally. This section describes how to upgrade your
GWN76XX.

Upgrading via Web GUI

The GWN76XX can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server
and selecting a download method. Configure a valid URL for TFTP, HTTP or HTTPS; the server name can be FQDN or IP
address.
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
The upgrading configuration can be accessed via:
Web GUI��System Settings��Maintenance��Upgrade

Upgrading Slave Access Points

When the GWN76XX is being paired as slave using another GWN76XX Access Point acting as Controller, users can upgrade
their paired access points from the GWN76XX Master Controller.
To upgrade a slave access point, log in to the GWN76XX acting as Master Controller and go to Access Points.
Description
Configures whether to send notification if memory usage is greater than the configured
threshold.
Once enabled, master will generate an Alert when AP throughput reaches the configured
threshold.
Once enabled, master will generate an Alert when SSID throughput reaches the configured
threshold.
Configures whether to send notification on admin password change.
Configures whether to send notification on firmware upgrade.
Once enabled, system will generate an Alert when there is a Rogue AP detected.
Configures whether to send notification when AP going offline.
Email Events
Network Upgrade Configuration