Starting / Stopping The Engine - Stihl HL 94 Instruction Manual

English
Practice quickly detaching the power
tool from the carabiner as described
under "Disconnecting Machine from
Shoulder Strap".
If you are using a shoulder strap:
Practice slipping the strap off your
shoulder.
16
Starting / Stopping the
Engine
Controls
4 3
2
1
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of Stop Switch and
Ignition System".
4 Throttle set wheel – limits travel of
throttle trigger – see "Function of
Throttle Set Wheel".
Function of Stop Switch and Ignition
System
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Function of Throttle Set Wheel
4
The throttle set wheel (4) enables the
travel of the throttle trigger to be preset
anywhere between idle and full throttle.
Turn throttle set wheel (4) in
–
direction of – to reduce throttle
trigger travel and maximum engine
speed.
Turn throttle set wheel (4) in
–
direction of + to increase throttle
trigger travel and maximum engine
speed.
It is possible to override the preset
–
stop and open the throttle wide by
pulling the throttle trigger firmly – the
preset stop remains unaffected. The
original setting is restored when the
throttle trigger is released.
HL 94