Marantz DV8400 User Manual page 42

7 DVD Setup Menu
MPEG Out
• Default setting: MPEG 3 PCM
You only need to make this setting if you connected the
player to another component (AV amplifier, etc.) using
one of the digital outs.
If your AV amplifier (or other connected component)
is compatible with MPEG audio, set this to MPEG,
otherwise set it to MPEG 3 PCM (MPEG audio is
converted to more compatible PCM audio). Check
the manual that came with the other component if
you're unsure whether it is MPEG audio compatible.
Audio1 A2 Video1
Dolby Digital Out
Linear PCM Out
SACD Playback
Move
Digital Out
• Default setting: On
If at any time you need to switch off the digital audio
output, set this to Off, otherwise leave it On. Note
that you can't switch on/off the optical and coaxial
outputs individually.
Audio1 A2 Video1
Dolby Digital Out
Linear PCM Out
SACD Playback
Move
Super Audio CD Playback
• Default setting: 2ch Area
Super Audio CD discs can be divided up into several
different areas – stereo audio, Multi channel audio
and, for hybrid Super Audio CDs, standard CD audio.
The Super Audio CD Playback setting enables you to
select which area of the disc you want to play.
Audio1 A2 Video1
Dolby Digital Out
Linear PCM Out
SACD Playback
Move
Note
If you select an area that isn't on the disc loaded, a
different area of the disc will play. For example, if you
choose standard CD audio but the disc loaded is not
a hybrid Super Audio CD, the stereo Super Audio CD
audio will play.
42
V2 Language General
Audio DRC — Off
— Dolby Digital
DTS 3 PCM
DTS Out —
Down Sample On
—
MPEG Out MPEG
MPEG 3 PCM
Digital Out
— 2ch Area
SETUP Exit
V2 Language General
Audio DRC — Off
Dolby Digital
—
DTS 3 PCM
DTS Out —
— Down Sample On
MPEG 3 PCM
MPEG Out —
Digital Out On
Off
SETUP Exit
V2 Language General
Audio DRC — Off
— Dolby Digital
DTS 3 PCM
DTS Out —
— Down Sample On
MPEG Out 2ch Area
Digital Out Multi-ch Area
CD Area
Exit
SETUP
Virtual Surround
• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out (see below)
to 2 Channel, you can simulate surround sound by
setting Virtual Surround to TruSurround.
Language General
A1 Audio2 Video1 V2
Virtual Surround — Off
Audio Out TruSurround
Speaker Setting
Gain Setting — Fix
CD Digital Direct — Off
Move
Note
• There is no effect when the audio source is DVD-
Audio, DTS or 96 kHz LPCM or during CD, MP3 or
Super Audio CD playback.
• The digital audio output level is reduced when
playing 2 channel Dolby Digital DVDs or Video CDs
with TruSurround selected. If you play a multichan-
nel Dolby Digital DVD with Dolby Digital to PCM
conversion (see page 41) and TruSurround
selected, there is no digital output.
• How good the surround effect is varies with the
disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
SETUP Exit