Filling The Siphon With Water - Viessmann VITODENS 242-F Installation And Service Instructions Manual
3.2 to 26 kw gas condensing/solar storage combi boiler gas council no. 41-819-18; 41-819-19 natural gas and lpg version
Hide thumbs
Also See for VITODENS 242-F:
- Installation and service instructions manual (152 pages) ,
- Technical manual (112 pages) ,
- Installation and service instructions for contractors (144 pages)
Table of Contents
Advertisement
Commissioning, inspection, maintenance
Further details regarding the individual steps
Filling the siphon with water
B
A
C
50
(cont.)
1. Pivot control unit forward.
2. Remove retaining clip A.
3. Pull filler pipe B upwards.
4. Remove trap C downwards.
5. Fill siphon with water and refit.
6. Check that the condensate pipe is
connected correctly to the siphon and
heat exchanger.
Note
Route the drain hose without any
bends and with a constant fall.
7. Refit cover panel.
8. Secure control unit back into the
operating position.
Advertisement
Chapters
Table of Contents
