Table of Contents
Advertisement
ADJUSTMENT (for DN-V750 model)
1. Connect the terminal as shown fig. 1.
2. Set the CF card (CF-96-27=adjustment 2) to CARD SLOT.
3. Turn OFF the 1 and 2 Dip switch on the back panel.
4. Turn the power switch ON.
5. VIDEO mode
(1) Press the "SELECT" button about for 2 second.
(2) Until the display appear at the upper right of a monitor.
(3) Set "VIDEO", "AUDIO", "PICTURE", "SCRIPT" to "VIDEO".
6. Display "Color bar".
(1) Press the "STOP" button, pressing the "SELECT" button.
(2) Until the display appear at the upper right of a monitor.
(3) Press the "STOP" button to 1, pressing the "SELECT" button.
(4) Press the "PLAY" button and quickly press the "PAUSE" button.
Display "Color bar" with a still picture.
7. Adjusting the output of Composite.
Adjust "980mVP-P ± 40mVP-P" by VR101.
8. Turn the power switch OFF.
4
DN-V750/V755
fig.1
Advertisement
Table of Contents
