Siemens Milltronics MUS Operating Instructions Manual page 42

Technical data
8.1 Specifications
Belt speed
3 m/s (600 fpm)
Contact Siemens application engineering for consideration of higher belt speeds.
Capacity
up to 5000 t/h (5500 STPH) at maximum belt speed
Conveyor incline
Table 8- 1 Conveyor incline
± 20° from horizontal, fixed incline
up to ±30° with reduced accuracy
Conveyor idler
flat to 35 °
up to 45 ° with reduced accuracy
Idler diameter
50 to 180 mm (2 to 7 ")
Idler spacing
0.6 to 1.5 m (2.0 to 5.0 ft)
Interconnection (to integrator)
< 150 m (500 ft) 0.75 mm
> 150 m (500 ft) to 300 m (1000 ft) 0.75 to 0.34 mm
40
Review by Siemens application engineer required.
Review by Siemens application engineer required.
18 AWG) 6 conductor shielded cable
2 (
(18 to 22 AWG) 8 conductor shielded cable
2
Operating Instructions, 06/2012, 7ML19985CQ02-02
Milltronics MUS