4.5
Installation Procedure
4.5.1
Installation introduction
The MUS installation has eight steps:
1. Remove the idler(s)
2. Remove the idler foot plate
3. Idler mounting
4. Position the weigh module
5. Position the scale
6. Release the shipping stops
7. Align and level the idlers
8. Check alignment
4.5.2
Remove the idler
Remove the idler(s) from the desired location on the conveyor.
Milltronics MUS
Operating Instructions, 06/2012, 7ML19985CQ02-02
Installing/mounting
4.5 Installation Procedure
19