Table of Contents
Advertisement
4.5.6
Position the scale
Mark the position and make new mounting holes suited for M12 (1/2") bolts. Refer to the Outline
Dimensions.
Place the scale on the conveyor stringers with the arrows on the weigh modules pointing in the
direction of belt travel (retreat idlers). Mount the modified idler onto the scale using the idler
clamping brackets.
①
Milltronics MUS
Operating Instructions, 06/2012, 7ML19985CQ02-02
Idler clamping brackets
Installing/mounting
4.5 Installation Procedure
25
Advertisement
Table of Contents
