Mounting To A Tail Pulley - Siemens SITRANS WS300 Operating Instructions Manual

Mounting to a Tail Pulley

angle bracket slotted
for arrestor rod
≥
10 mm (0.375")
WS300
angle bracket slotted
for arrestor rod
Notes:
• Distance (d) is the take up travel on the tail pulley
• When adjusting the belt take up, ensure there is play on the arrestor rod. If the
arrestor rod is pushed against the end of its travel slot, premature wear may
result on the bearing.
Page 8 SITRANS WS300 Speed Sensor – OPERATING INSTRUCTIONS 7ML19985ML01
d
flexible conduit
tension spring (supplied)
belt
flexible conduit
tension spring (supplied)
arrestor rod (cut to suit)
89 mm
(3.5")
WS300