Installing/mounting
5.1
Basic safety instructions
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical data (Page 31).
5.2
Install the junction box
Introduction
You can mount the junction box in any position. The cable glands should point downward.
Condition
The cover is open.
Procedure
1. Prepare the installation location.
2. Set the holes according to the dimension drawings.
Dimension drawings (Page 35)
3. Screw the junction box securely to the wall with four screws.
SIWAREX JB
Operating Instructions, 09/2022, A5E43011851-AD
5
21