Asko TD75.B2 Series Instructions For Use Manual page 28

CONDENSED WATER
You can choose between draining condensed water into a condensate tank or directly into the drain.
Condensed water
Condensed water
RESET
This means that all settings will return to the default settings and your own settings will be deleted.
Reset default
SOUNDS
In the initial stage of drying or during drying, the compressor and the pump may cause noise which,
however, does not aff ect the dryer operation.
Humming sound: this is the sound of the compressor unit. The level of noise depends on the program and the
drying stage.
Whirring sound: from time to time, the compressor unit is ventilated.
Pumping sound: the pump is pumping the condensate into the condensate tank.
Clicking sound: clicking noise is caused by automatic cleaning of the heat exchanger (compressor).
Swishing water sound: can be heard during automatic cleaning.
Rattling sound: can be heard during drying if laundry has any hard parts (buttons, zippers etc.)
28
Tank
1
Drain
1
Yes
3
Customer Care Center, 1-800-898-1879, www.askona.com
Press the button 1 for
Ok
Use the program selector knob or the
button 1 to choose between following:
"Tank" – run condensate water into a
condensate tank
6
"Drain" – run condensate water into a
drain
If you decide to choose option "Drain",
Ok
it is necessary to observe how to
connect drain hose (see chapter
"INSTALLATION AND CONNECTION /
Draining the condensate").
6
Press the button 6 to return to "System
Settings".
Confi rm the selection by pressing the
Info Back
button 3 (YES).
Press the button 6 to return to "System
Settings"..
6
to appear.