Asko TD75.B2 Series Instructions For Use Manual page 23

Hide thumbs Also See for TD75.B2 Series:
Table of Contents

Advertisement

STEP 6:
CLOSE THE DOOR AND START THE DRYING PROCESS.
Close the dryer door and press the Start/Pause button.
Start (pressed briefl y – start/resume)
Pause (pressed briefl y – drying temporarily suspended)
Cancel (press and hold the button for 3 seconds)
Remaining time
Depending on the selected program and load, anticipated drying time will be displayed in hours and minutes.
Actual drying time will depend on the selected program, load, type of laundry, spinning rate etc.
Actual drying time may be longer or shorter than initially displayed.
Pausing, stopping or changing the program
Door is open, please close the door.
Preparing for program canceling. Cooling down.
Program canceled. Garments can still be hot.
Only after the cooling is complete, you can use the program selector knob to select a new program and press
the Start/Pause button.
The fi nal drying cycle includes a cooling down stage without heater operation. It makes sure the laundry
is of suitable temperature at the end of the program and that it can be taken from the dryer without risk of
touch hot clothes.
A drying program can be paused using the ON/OFF button.
The dryer will switch off . Press the Start button to resume the program.
Info
Starting
Info
Drying
Paused
Customer Care Center, 1-800-898-1879, www.askona.com
2:20
2:19
To pause a program, briefl y press the
Start/Pause button.
To resume the program, press the Start/
Pause button again.
The drying program may also be paused
by opening the dryer door.
To resume the program, simply close
the door and press the Start/Pause
button.
To stop and cancel the washing
program, press the Start/Pause button
and hold it for 3 seconds.
The selected program will be stopped
and the cooling stage will begin. Cooling
time depends on the selected program.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents