Forward Skip For Card Playback - Canon ELURA10 A Service Manual

7-16-11 Forward Skip for Card Playback

If you press and hold the card "+" (or "–") button during card playback (single
playback), you can quickly go to the desired card image.
On the card counter display of "display no./total count", the display no. will be
changed while you press and hold the button, and the image when you release
the button will be read out and displayed
* If the display no. exceeds the total count during card feeding, the
display no. will restart from 1.
* If the display no. gets smaller than "1", the display no. will restart re-
versely from total count.
Card Related Cautions for All Modes
* Cautions
• When the red ">>>>" mark (this mark is white "
blinking facing toward the Card mark (>>>>), this means that the card is being written, so never remove the card, disconnect the
battery pack or AC power cord at this time. Such actions can damage the images being recording (marking readout and
playback impossible) or even damage all of the images already recorded on the card.
• When the green "<<<<" mark is blinking facing away from the Card mark (
should never be removed at this time.
• Always turn the Power switch to the "OFF" position before inserting or ejecting a card.
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
" in the Mirror Photo mode/Memory mode and in the Line Out screen) is
), data is being read from the card, so the card
1-56
ELURA20 MC A, ELURA10 A