Disassembly Of Lcd Unit - Canon ELURA10 A Service Manual

1-18 Disassembly of LCD Unit 3

(1) Remove one screw (j × 1) to detach the LCD Lock Switch.
(2) Separate one screw (h × 1), LCD Hinge Unit and LCD SW FPC.
(3) Remove two screws (D × 2), peel off the Magnet sheet and detach the Hinge Covers L,R.
< Note on Reassembling >
(1) The magnet has polarities.
(2)
(3)
LCD Hinge Unit
Hinge Cover R
Note on Reassembling (1)
Hinge Cover R
Hinge Cover L
The side with red paint (N)
should face upward.
LCD SW FPC
(3) - D
Magnet Sheet
(3)
Magnet
Hinge Cover L
Fig. 4-17
4-18
ELURA20 MC A, ELURA10 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
(1) - j
(2) - h
(1)
h j
2.5mm
3.5mm
Metal
Black
M1.7
M1.7
(self tap)
(1)
LCD Lock Switch
D
4mm
Black
M1.7
(self tap)