V
ECTOR
Operating instructions for the
The X2 operating system was designed for universal controllers and sensors. Devices based on the X2
operating system contain a multitude of standardized functions and application possibilities. From simple
ventilation controllers for domestic applications to HVAC system solutions for entire buildings. There is a
suitable solution for almost every application. With the EasySet program, the controllers can be conveniently
read out, programmed and transferred to other controllers.
Applications
These operating instructions apply to devices of the X2 series with integrated control unit, as well as to devices of the
OPA2 and OPU2 series.
Ordering
Model
Items
OPA2-VC
40-500007
OPA2-2T-VC
40-500047
OPA2-2TH-VC 40-500023
OPU2-T-VC
40-500100
OPU2-TH-VC
40-500101
OPU2-2T-VC
40-500024
OPU2-2TH-VC 40-500025
In addition, the various product descriptions and the programming instructions for technicians are contained in separate
documents. This should facilitate the work with the different controllers and operating levels.
Doc : 70-00-0736, Serie X2, 20190206
subjects to alteration
X2 operating system
Remote terminal
Remote terminal with T + 2 passive inputs
Remote terminal with RHT + 2 passive inputs
Remote terminal with T
Remote terminal with RHT
Remote terminal with RT + 2 passive inputs
Remote terminal with RHT + 2 passive inputs
© Vector Controls GmbH, Schweiz
Description
www.vectorcontrols.com
X2-OPERATING MANUAL
Page 1