Universal Remote Control MSC-400 Programming Manual page 74

Master system controller
Hide thumbs Also See for MSC-400:
Table of Contents

Advertisement

66
GENERAL INFORMATION
MSC-400 MASTER SYSTEM CONTROLLER
U
The MSC-400 is the heart and brains of any home entertainment system. All system components, (RFX-250 RF
Sensor, Status Sensors, Emitters, RS232 Cables, and USB to Media Center Cables) are connected to the MSC-
S
400. It enables simple, reliable control and provides flexible, comprehensive connections that allow the seam-
I
less integration of any system device.
N
MSC-400 Front Panel Features
G
C
C
P
E
1 Power LED – One, blue LED illuminates to indicate MSC-400 power supply is attached and connect-
D
ed to AC power.
I
2 Status LED – One, blue LED flashes when an RF signal from a MSC compatible remote is received
T
and understood via the RFX-250 Sensor.
O
3 USB1 LED – One, blue LED illuminates to indicate that a PC is connected to the MSC-400 front
panel USB1 Programming Port.
R
4 USB2 LED – One, blue LED illuminates to indicate that a Media Center PC is connected to the MSC-
400 rear panel USB2 Port.
T
5 Video Or Voltage Sensor LEDS – Six, green LEDs illuminate to indicate that devices connected to the
O
corresponding MSC-400 rear panel sensor inputs are ON by sensing the presence of composite
video or AC or DC voltage.
P
6 IR Learning Sensor – One, IR sensor used to learn IR commands into a MSC Project File when a par-
R
ticular code is not available in the IR Database.
O
NOTE - Using one of the MSC-compatible remotes connected directly to the PC running CCS is recommend
ed for convenience in learning IR Commands.
G
R
7 USB1 Programming Port – One, USB Type B Port connects to a PC running CCS for programming
the MSC-400.
A
M
Reference: Features and Parts
Type in Section Title
MSC-400 Front Panel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents