Adding A Macro Group And Smart Macros - Universal Remote Control MSC-400 Programming Manual

34
NOTE - There are no absolutes in how a MSC-400 has to be programmed, so the following sections are sug-
gestions and guidelines for Macro programming. Every system is different, every user has different preferences
and each installer has a different perspective of how things can be done. However, what is created must be
U
done correctly for the system to function properly.
S

Adding a Macro Group and Smart Macros

I
1 In CCP MSC Editor Model Designer Treeview, right click on the MSC-400.
N
G
C
2 In the pop-up, click Add Macro Group. Macro Group 1 (GRP-01) will appear at the bottom of the
C
treeview.
P
3 Right click the Macro Group.
4 In the pop-up, select Rename. The Macro Group Directory will become active. Type the name of
E
the Macro Group. (System ON/OFF Macros).
D
5 Click within the Treeview to Save.
I
6 Right click the Macro Group Directory. In the pop-up, select Add Smart Macro.
T
7 Right click the Smart Macro. In the pop-up, select Rename. The Smart Macro Directory will become
O
active. Type the name of the Smart Macro. (System ON Macro).
R
8 Click anywhere in the treeview to Save.
T 9 Repeat steps 6-8 to add a System Off Macro.
O
OR...
1 In the CCP MSC Editor Menu Bar, click Program, then click Make Smart Macro. The Make Smart
P
Macro window will appear.
R
2 Click the New Group button. The Add Action Group window will appear.
O
G
R
A
M
Macro Groups and Smart Macros
Make Smart Macro window
Type in Section Title
Add Action Group window