9 The Base Station Model Properties window appears.
10 Name the Base Station.
Example: "MSC-400FULL (Home Theater)"
11 Select an RF ID from the RF ID drop-down list.
12 If using a second base, check and choose the second RF ID.
13 Click "OK"
14 Close the System Configuration window by clicking on the "Close" icon in the upper
right hand corner of the window.
15 Save the File. In the main toolbar, select "File" and then click on "Save As".
16 The "Save As" window appears.
17 Enter a name for the new File, Example: "Smith Residence rev1" and then click on the "Save" but-
ton.
Saving your New File
Type in Section Title
Type in Section Title
21
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R