10
10
Model Designer Treeview
1 Within the Model Designer Treeview to the right, click on a
Connected Device, Macro Group, Smart Macro or the MSC-400
U
2 Once the selection has been made it's respective property
S
window will open and allow configuration.
I
3 Configure the property windows as detailed shown below.
N
G
C
C
P
E
D
I
T
O
R
T
O
Connnected Device
P
R
This property window gives the option to
O
rename the base station and informs you of it's
G
current RFID as well as it's Master or Slave des-
ignation.
R
A
M
Type in Section Title
New Features
Click on MSC400, a Device (Xbox), a
Macro Group (Source Select Macros) and
a Smart Macro (DVD 2).
Click on a device to change it's name, port
id, and if it is a serial device designate it's
Data Type as well as selecting whether or not
a carriage return is needed.
.
Model Designer
MSC-400