Table of Contents
Advertisement
C. CHIRP INDICATORS:
Chirp
1 chirp
Arm
2 chirps
Disarm
3 chirps
Ajar Warning
4 chirps
Disarm / Triggered
6 chirps
Car Locator
E. ACTIVE ARMING – LOCK & ARM:
1. Press
button on the transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle door will lock upon arming when interfaced with the security system.
AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
SILENT ARMING: Spin up the
transmitter
buttons 2 seconds to arm your security system, No chirp sound will be heard, arm
confirmation will be through the vehicles parking lights only.
SENSOR BY-PASS:
Bypass The Zone 4: Spin up the
then press the button
seconds on the transmitter will arm the security system and
by-pass the zone 4-shock sensor.
Bypass The Zone 6: Spin up the
then press the button
seconds on the transmitter will arm the security system and
by-pass the zone 6-shock sensor..
Bypass The Zone 4 and Zone 6: Spin up the
the button
or press the
3
transmitter will arm the security system and by-pass the zone 4 and 6-shock sensor.
.The system will chirp one additional time to confirm the sensor bypass mode was
activated. The sensor bypass feature is programmed to activate for one arming cycle
only. The security system will return to normal operation during the next arming cycle.
HIDDEN ALARM FUNCTION: Spin up the
"Hidden Alarm" button or press the
button to activate the hidden alarm function. The security system will arm and with
"Hidden Alarm Function" The siren / horn will be silenced even if the sensor is
triggered in the armed status.
F. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature, which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the
vehicle all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically "ARM". The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING:
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system disarmed, Press the
respond with [1] chirp and LED will turn "ON". The security system will remain in this temporally state for
as long as you wish. To exit passive by-pass, press the transmitter
return to normal status.
Function
switch to the page
switch to the page
or press the
-
1
switch to the page
or press the
2
-
-
-
-
button first; within 3 seconds press the
D. PARKING LIGHT:
Parking light
1 flash
2 flashes
3 flashes
12 flashes
Constant On
and then press the "Silent Arm" button or Press the
1
and
2
button within 5
and
2
button within 5
-
switch to the page
button within 5 seconds on the
switch to the page
and then press the
1
13
Function
Arm
Disarm
Disarm / Triggered
Car Locator
Under Remote Start
and then press
2
button twice, the security will
or
button and the system will
Advertisement
Table of Contents
