Putting On The Heart Rate Monitor - Garmin F4ARGA00 Quick Start Manual

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor,
you can skip this task.
NOTE: The device may cause chafing when
used for long periods of time. To alleviate this
issue, apply an anti-friction lubricant or gel to
the center of the module where it contacts your
skin.
Do not apply anti-friction gel or lubricant on the
electrodes.
Do not use gels or lubricants that contain
sunscreen.
You should wear the heart rate monitor directly
on your skin, just below your breastplate. It
should be snug enough to stay in place during
your activity.
1
Push one tab
slot in the heart rate monitor module.
2
Press the tab down.
3
Wet the electrodes
module to create a strong connection
between your chest and the heart rate
monitor module.
NOTICE
on the strap through the
on the back of the
7