Method Used To Set Multiple Tm-Dt Devices - Epson TM-H6000IV-DT Technical Reference Manual

Method Used to Set multiple TM-DT devices

To install and operate multiple this products you will need to set IP addresses for each device and configure var-
ious printing control settings.
The following method is available in order to configure settings efficiently.
• Configure settings for each device separately using EPSON TMNet WebConfig
Basic setup procedure. Connect a keyboard and a display to the TM-DT devices and have a worker setup
each device individually.
Save and register web content and certificate files to a USB memory stick or similar storage device.
See "TM-DT Software Settings" on page 95
• Configure settings using a TM-DT software settings file saved to a USB memory stick
This method is used to have the product automatically configure settings from the settings file on the USB
memory stick. When doing so a user does not need to connect a keyboard and display to perform operations.
This is the conventional Easy Setup method.
Prepare a settings file (setting.ini) with TM-DT settings on a Windows computer. Then, put this settings file
along with web content and the certificate file onto a USB memory stick.
A separate USB memory stick for each TM-DT will need to be prepared when setting IP addresses for multi-
ple TM-DT devices individually.
See "Deployment Guide" for more information on this method.
• Configure settings by building a configuration server system
This method automatically applies settings using the settings file downloaded by the TM-DT based on a
request sent to the configuration server.
This allows for a more efficient configuration system through the setting of functions used to configure indi-
vidual settings, such as different IP addresses for each TM-DT, on the configuration server.
First, build a configuration server system and prepare TM-DT settings data to include TM-DT settings, web
content and the certificate file. You will need to configure settings for the TM-DT so that it sends the request
to the configuration server.
See "Deployment Guide" for more information on this method.
Chapter 4 System Development Using TM-DT Software
for more information on this method.
4
89