Table of Contents
Advertisement
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused composite Video
output sockets available:
•
If so, you can continue with this procedure.
•
If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an composite Video source device:
1.
Take the (optional accessory) Video cable and connect one end to the composite Video
output socket of the Video source device.
2.
Connect the other end of the Video cable to the VIDEO socket on the projector.
The final connection path should be like that shown in the following diagram:
•
The projector is only capable of playing mixed mono audio, even if a stereo audio input
is connected. See
•
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, check that the Video source device is turned on
and operating correctly. Also check that the signal cables have been connected
correctly.
•
You need only connect to this device using a composite Video connection if Component
Video and S-Video inputs are unavailable for use. See
devices" on page 19
22
Connection
A/V device
Video cable
"Connecting Audio" on page 19
for details.
Audio cables
for details.
"Connecting Video source
Advertisement
Table of Contents
