Samsung DigiMax V4 Instructions Manual page 86

Video
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be
governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab.
2. Press the DOWN and the cursor will be shifted to the main
menu.
3. Select [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
5. Select [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the DOWN button on the [IMPRINT] menu and the next
menu page will be displayed.
7. Select [VIDEO] menu by pressing the UP/DOWN button.
8. Press the RIGHT button and the cursor will shift to the [VIDEO]
sub menu.
9. Select the desired sub menu by pressing the UP/DOWN button.
10. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be disappeared.
INFORMATION
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy,
Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand,
Norway..
PORTRAIT SETUP MyCAM
L 2272X1753
SIZE
QUALITY FINE
METERING MULTI
SINGLE
SHOOTING
EXIT : MENU
PAGE :
PORTRAIT SETUP MyCAM
SIZE L 2272X1753
FINE
QUALITY
METERING MULTI
SHOOTING SINGLE
EXIT : MENU
PAGE :
88