Samsung DigiMax V4 Instructions Manual page 39

MF button
In dark conditions, the autofocus may not function. If this occours, press the MF button and you can
select manual focus.
After changing the focus manually, the image can be dim. Take care to use this function.
While pressing the MF button, the MF bar will be displayed on the
LCD monitor.
While pressing the MF button, select desired focus value by
pressing the UP/ DOWN button and take a picture.
- Pressing the UP button : focus into the long range.
zoom
- Pressing the DOWN button : focus into a close range.
Release the MF button and the MF bar will disappear. If you
change the focus value, the MF indicator will be displayed at the
bottom of the LCD monitor.
INFORMATION
If you didn't change the focus value while you pressing the MF button, the auto focus is
activated.
You can's use the manual focus function in the EASY and VOICE RECORDING mode.
The MF bar is divided into 3 parts according to the photography range.
Part of the MF bar
1st part
2nd part
3rd part (only in wide zoom mode)
41
Pressing the MF button
After changing the focus value
Photography range
0.8m ~ infinity
0.3m ~ 0.8m
0.06m ~ 0.3m
161
161