Self-Timer/ Remote Button - Samsung DigiMax V4 Instructions Manual

SELF-TIMER/ REMOTE button

When the menu is displayed on the LCD monitor, pressing the RIGHT button makes the cursor shift
to the sub memu.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the SELF-
TIMER( )/ REMOTE(
Selecting the self-timer
1. Rotate the mode dial to the RECORDING (except MOVIE CLIP, VOICE RECORDING) mode.
The remote button activates only in the MOVIE CLIP mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.
Selecting the self-timer mode
- Selecting the self-timer mode : Pressing the shutter button will allow an interval of ten seconds
- Selecting the remote mode
Self-timer/ remote mode definition
Indicator Mode
2s
10s
Remote mode
) button.
161
before the image is taken. After that, the self-timer is cancelled.
: The remote control sensor will blink at 2 seconds intervals.
Pressing the shutter button in the remote controller will allow
an interval of 2 seconds before the image is taken. In the
remote mode, you cannot use the shutter button.
Pressing the shutter button will allow an interval of 2 seconds before the image is taken.
Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
You can take a picture with the remote controller.
161
Selecting the remote mode
Definition
38