Slide Show - Samsung DigiMax V4 Instructions Manual

Slide show

Images can be displayed continuously at pre-set intervals.
1.Press the play mode button and press the menu button.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Select [SLIDE SHOW] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [SLIDE
SHOW] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
* If you select [1 ~ 10SEC], you can select the [REPEAT]
secondary menu.
Select [1 ~ 10SEC] and press the RIGHT button and the cursor
shift to the secondary menu.
Select the desired menu by pressing the UP/DOWN button.
- [ON] : Even though a cycle(from the first image to the last
image) is completed, the slide show doesn't stop.
- [OFF] : If a cycle is completed, the slide show stop automatically.
Press the menu button twice and the slide show will start.
Press the menu button twice again and the slide show will stop and the menu will be displayed.
To pause the slide show, press the play & pause button.
To start the slide show again, press the play & pause button again.
INFORMATION
The default is OFF and the loading time depends on the image size and quality.
The slide show will start from a image that was displayed on the LCD monitor and the
[POWER OFF] function can s activate. While the slide show is playing, AVI file is just
displayed it s first frame.
If the slide show is paused, [PAUSE] message will be displayed on the LCD monitor.
PORTRAIT SETUP MyCAM
SIZE L 2272X1753
FINE
QUALITY
METERING MULTI
SHOOTING SINGLE
EXIT : MENU
PAGE :
PORTRAIT SETUP MyCAM
L 2272X1753
SIZE
QUALITY FINE
METERING MULTI
SINGLE
SHOOTING
EXIT : MENU
PAGE :
70