Table of Contents
Advertisement
Status Messages
On-Screen Messages
SEARCHING
ACQUIRING SIGNAL
OUT OF RANGE
LAMP WARNING -
CHANGE LAMP AND
RESET LAMP TIMER!
OUT OF LAMP USAGE
TIME. CHANGE THE
LAMP!
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
BenQ DX/S660 DX/S650 User's Guide
Projector is searching for input.
Projector has identified the input signal and is running the
auto image adjustment function.
Input signal frequency exceeds the projector's range.
The lamp has been in operation for 1400 hours. Install a
new lamp for optimal performance.
The lamp has been in operation for 1480 hours, and the
power will turn off after 20 hours.
The lamp has been in operation for over 1500 hours. The
warning message will display for 30 seconds every 5 min-
utes after you turn on the projector and the power will
turn off automatically after 10 minutes.
Description
Troubleshooting
25
Advertisement
Table of Contents
