Table of Contents
Advertisement
Status Messages
On-Screen Messages
SEARCHING
ACQUIRING SIGNAL
OUT OF RANGE
LAMP WARNING -
CHANGE LAMP AND
RESET LAMP TIMER!
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
OUT OF LAMP USAGE
TIME. CHANGE THE
LAMP!
34
Troubleshooting
Description
Projector is searching for input.
Projector has identified the input signal and is run-
ning the auto image adjustment function.
Input signal frequency exceeds the projector's range.
The lamp has been in operation for 1900 hours.
Install a new lamp for optimal performance.
The lamp has been in operation for 1980 hours, and
the power will turn off after 20 hours.
The lamp has been in operation for over 2000 hours.
The warning message will display for 30 seconds every
5 minutes after you turn on the projector and the
power will turn off automatically after 10 minutes.
Advertisement
Table of Contents
