Electrolux WASL3E 200 User Manual page 3

Table of Contents

Advertisement

Available languages

Available languages

• Obey the safety instructions on the deter-
gent packaging to prevent burns to eyes,
mouth and throat.
• Make sure that you remove all metal ob-
jects from the laundry. Hard and sharp
material can cause damage to the appli-
ance.
• Do not touch the glass of the door while
a programme operates. The glass can be
hot (only for front-loading appliances).
CARE AND CLEANING
• Deactivate the appliance and disconnect
the mains plug from the mains socket.
• Do not use the appliance without the fil-
ters. Make sure that the installation of the
filters is correct. An incorrect installation
causes water leakages.
INTERNAL LAMP
This appliance has an internal lamp that
comes on when you open the door and
goes off when the door is closed.
Warning! Do not look directly into the
beam of the lamp.
To replace the internal lamp, contact
the service centre.
Disconnect the mains plug from the
mains socket before the replacement
of the internal lamp.
INSTALLATION
• The appliance is heavy, be careful when
you move it.
• Do not transport your appliance without
the transit bolts, you can damage internal
components and cause leakages or mal-
functions.
• Do not install and connect a damaged
appliance.
• Make sure to remove all packaging and
transport bolts.
• Make sure that the mains plug is discon-
nected from the mains socket during in-
stallation.
• Only a qualified person must do the elec-
trical installation, the plumbing and the in-
stallation of the appliance. This to prevent
the risks of structural damage or injury.
• Do not install or use the appliance where
the temperature is less than 0 °C.
• When you install the appliance on a car-
pet floor, make sure that there is air cir-
culation between the appliance and the
carpet. Adjust the feet to have the neces-
sary space between the appliance and
the carpet.
Water connection
• Do not connect the appliance with old
hoses already used. Only use new hoses.
• Make sure not to cause damage to the
water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long time.
Let the water flow for some minutes, then
connect the inlet hose.
• The first time you use the appliance,
make sure that the water hoses and the
couplings do not have leakages.
Electrical connection
• Make sure that the appliance is earthed.
• Make sure that the electrical information
on the rating plate agrees with the power
supply.
• Always use a correctly installed shock-
proof socket.
• Do not use multiple plugs and extension
cables. There is a risk of fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
• Make sure not to cause damage to the
mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
DISCARD THE APPLIANCE
1. Disconnect the mains plug from the
mains socket.
2. Cut off the mains cable and discard it.
3. Discard the door catch. This prevents
children or pets to be closed in the ap-
pliance. There is a risk of suffocation
(only for front-loading appliances).
electrolux 3

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wasl6e 200

Table of Contents