Troubleshooting; Cutter And Peeler Issues - SATO WS208 Technical Manual

4 Troubleshooting

4 Troubleshooting
This chapter provides the information about accessories issues, internal errors and
their possible solutions.

4.1 Cutter and Peeler Issues

Issue
The cutter is experiencing issues.
The peeler is experiencing issues.
Solution
￭
If there is a paper jam, clear it.
￭
The cutter has become loose. Fix the
cutter in position and tighten it.
￭
The cutter blade is not sharp anymore.
Replace your cutter with a new one.
￭
If there is a paper jam, clear it.
￭
The peeler has become loose. Fix the
peeler in position and tighten it.
￭
Make sure the liner is correctly threaded
under the plate and the peeler.
23
Cutter and Peeler Issues